Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hybrid S555 - (PC+ABS) - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hybrid S555:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hybrid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 24 cm³/10min ISO 1133
温度 260 °C -
荷重 2.16 kg -
成形収縮率, 平行 0.6 % ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI 21 g/10min ASTM D 1238
温度 260 °C -
荷重 2.16 kg -
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
降伏応力 62 MPa ISO 527
破壊ひずみ 48 % ISO 527
曲げ弾性率, 23°C 2550 MPa ISO 178
ノッチ付きIzod衝撃強さ, +23°C 44 kJ/m² ISO 180/1A
ASTM数据
降伏応力 63.4 MPa ASTM D 638
破断伸び 45 % ASTM D 638
曲げ弾性率 2550 MPa ASTM D 790
曲げ強さ 84.1 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 640 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 91 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 105 °C ISO 75-1/-2
厚さhでの燃焼性 5V 5VB class IEC 60695-11-20
試験片の厚さ 2.5 mm -
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 1.5 mm -
DTUL @ 66 psi 107 °C ASTM D 648
DTUL @ 264 psi 93.9 °C ASTM D 648
ビカット軟化温度 110 °C ASTM D 1525
その他の特性.値単位テスト基準
密度. 1180 kg/m³ ISO 1183
密度 1180 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
難燃.
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.