Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilamid TR 90 LXS natural - PAMACM12 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grilamid TR 90 LXS natural:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Grilamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Product-nomenclature: ISO 16396-PAMACM12 PA12,,GHLT,C18-020

 

Transparent Polyamide

Product Attributes

  Improved flowability and demoulding, Improved alcohol resistance, Improved impact resistance,
Highly transparent

Markets

  Automotive
  Automotive electr. and electronics, lighting, Cooling and climate control, Fuel systems,
Powertrain and Chassis, Interior
  Electricals & Electronics
  Electrical appliances, Electrical equipment, Connectors, Energy distribution,
Mobile phones and other portable devices, Lighting
  Industry & Consumer goods
  Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Medical devices, Power transmission,
Sanitary, water and gas supply, Sports & Leisure, Tools & Accessories
  Optics
  Optical components, Safety glasses, Sunglasses, Spectacle frames

Approvals

  Food Contact
  EU Requirements, FDA
  Medical
  ISO 10993
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
成形収縮率, 平行 0.5 / * % ISO 294-4, 2577
成形収縮率, 直角 0.6 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 - / 1500 MPa ISO 527
降伏応力 - / 60 MPa ISO 527
降伏ひずみ - / 6 % ISO 527
破壊呼びひずみ - / >50 % ISO 527
シャルピー衝撃強さ, +23°C - / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C - / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C - / 9 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C - / 12 kJ/m² ISO 179/1eA
熱的特性乾燥/調湿単位テスト基準
ISO データ
ガラス転移点, 10°C/min 125 / * °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 80 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 100 / * °C ISO 75-1/-2
線膨張係数, 平行 90 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 90 / * E-6/K ISO 11359-1/-2
厚さhでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 0.8 / * mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
体積抵抗率 - / 1E11 Ohm*m IEC 62631-3-1
表面抵抗率 * / 1E12 Ohm IEC 62631-3-2
耐電圧 - / 35 kV/mm IEC 60243-1
耐トラッキング性 - / 600 - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
吸水率 3 / * % Sim. to ISO 62
吸湿率 1.5 / * % Sim. to ISO 62
密度 1000 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
顆粒., ナチュラルカラー
添加剤.
滑剤., 離型剤.
特殊な特性.
高耐衝撃及び耐衝撃改良., 透明.
Certifications
Food contact, Food approval FDA 21 CFR, Biocompatibility ISO 10993
アプリケーション
自動車, 電気電子, 医療の, スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.