Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of GREENFLEX® ML 30 - EVAC - Versalis S.p.A

Material Data Center offers the following functions for GREENFLEX® ML 30:
unit conversion, PDF datasheet print, comparison with other plastics, flow length calculation, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Greenflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Greenflex ML 30 is an ethylene vinyl acetate copolymer (EVA) for injection moulding and extrusion,
Parts produced with Greenflex ML 30 show good elasticity performances and good ESCR resistance.  

Applications
Gaskets, especially when food contact is required, profiles and flexible items.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 2.5 cm³/10min ISO 1133
温度 190 °C -
荷重 2.16 kg -
溶融時の密度 787 kg/m³ -
溶融時の熱伝導率 0.2 W/(m K) -
溶融時の比熱 2540 J/(kg K) -
突き出し時の時の温度 74 °C -
機械的特性値単位テスト基準
ISO データ
引張弾性率 90 MPa ISO 527
ショア硬さA 94 - ISO 7619-1
ショア硬さD 42 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
溶融温度, 10°C/min 97 °C ISO 11357-1/-3
ガラス転移点, 10°C/min 85 °C ISO 11357-1/-2
線膨張係数, 平行 125 E-6/K ISO 11359-1/-2
電気的特性.値単位テスト基準
ISO データ
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 75 kV/mm IEC 60243-1
その他の特性.値単位テスト基準
密度 929 kg/m³ ISO 1183
機能
粘度せん断速度. , GREENFLEX® ML 30, EVAC, Versalis
せん断応力-せん断速度. , GREENFLEX® ML 30, EVAC, Versalis
特殊な特性
成形加工法.
射出成形.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃

#2

Typical processing temperature range:

    Melt temperature         150 - 210 °C

    Mold temperature          10 -  30  °C

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.