Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Desmopan 9392A - TPU - Covestro Deutschland AG
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces
Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center
- Extrusion- and injection molding grade
- very good hydrolysis and microbial resistance
- good low-temperature flexibility
Application: - Hoses, non-reinforced
- Cable sheathings
- Profiles
- Technical parts
機械的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO データ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
伸び率10%時の応力 | 3.8 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
伸び率100%時の応力 | 10.6 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
伸び率300%時の応力 | 20 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
破壊応力 TPE | 49 | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
破壊ひずみ TPE | >300 | % | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
圧縮永久ひずみ 70℃, 24h | 56 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
引裂強さ | 85 | kN/m | ISO 34-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
耐摩耗性 | 25 | mm³ | ISO 4649 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ショア硬さA | 92 | - | ISO 7619-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ショア硬さD | 42 | - | ISO 7619-1 |
その他の特性. | 値 | 単位 | テスト基準 |
密度 | 1150 | kg/m³ | ISO 1183 |
Processing Recommendation Injection Molding | 値 | 単位 | テスト基準 |
Pre-drying - Temperature | 80 | °C | - |
Pre-drying - Time | 1 - 2 | h | - |
Processing humidity | ≤0.05 | % | - |
樹脂温度 | 210 - 230 | °C | - |
金型温度 | 20 - 40 | °C | - |
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h
PROCESSING
Melt temperature: 210-230 °C
Mold temperature: 20-40 °C
Preprocessing
Max. Water content | ≤0.05 % |
Drying temperature | 70-110 °C |
Dry air dryer | 1-2 h |
Processing
Melt temperature | 195-215 °C |
Preprocessing
Max. Water content | ≤0.05 % |
Drying temperature | 70-110 °C |
Dry air dryer | 1-2 h |
Processing
Melt temperature | 195-215 °C |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.