Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DAIAMID® L1940 - PA12 - Daicel-Evonik Ltd.

Material Data Center offers the following functions for DAIAMID® L1940:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Daiamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
ISO データ
メルトボリュームレイト, MVR 8 cm³/10min ISO 1133
温度 230 °C -
荷重 2.16 kg -
機械的特性単位テスト基準
ISO データ
引張弾性率 1300 MPa ISO 527
降伏応力 40 MPa ISO 527
降伏ひずみ 9 % ISO 527
破壊応力 60 MPa ISO 527
破壊ひずみ >50 % ISO 527
シャルピー衝撃強さ, +23°C N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30゚C N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 7 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30゚C 9 kJ/m² ISO 179/1eA
ロックウェル硬度 R108 - ISO 2039-2
熱的特性単位テスト基準
ISO データ
溶融温度, 10゚C/min 178 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 50 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 110 °C ISO 75-1/-2
線膨張係数, 平行 140 E-6/K ISO 11359-1/-2
電気的特性.単位テスト基準
ISO データ
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
耐電圧 27 kV/mm IEC 60243-1
その他の特性.単位テスト基準
吸水率. 1.5 % Sim. to ISO 62
吸湿率 0.8 % Sim. to ISO 62
密度. 1010 kg/m³ ISO 1183
特殊な特性
特殊な特性.
紫外線安定化., 熱安定化.
アプリケーション
自動車
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.