Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of ALFATER XL ECO D40 2GP0000 - TPV - MOCOM Compounds GmbH & Co. KG
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Alfater datasheets, application examples or technical articles are available in Material Data Center
Base Polymer | Thermoplastic Vulcanisate (PP+EPDM) |
Colour | black |
Service Temperature | max. range (depending on load, geometry, etc.) -40-125 °C |
Special Features | Polymer recyclate,good weathering resistance,good chemical resistance,good ozone reistance,good hot air resistance,good hydrolysis resistant |
Market Segment | Automotive,building and construction,do-it-yourself,electrical and electronic,Machinery,Furniture |
Application Area | injection moulded parts,extruded parts,blow moulded parts,coextrusion |
Typical Applications | seals,sealing lip,handles,racking / shelving,impact protection / shock absorber,protection caps,cable ducts,casters,profile,tubes,cable guides,cable jacketing,bellows,air duct,2K components |
Adhesion to | Polypropylene Homopolymer,Polypropylene Copolymer,Polyethylene,Thermoplastic Vulcanisate (PP+EPDM),Thermoplastic Olefin Elastomer,Thermoplastic Elastomer general |
機械的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO データ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
引裂強さ | 73 | kN/m | ISO 34-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ショア硬さD | 40 | - | ISO 7619-1 |
その他の特性. | 値 | 単位 | テスト基準 |
密度 | 970 | kg/m³ | ISO 1183 |
Pre-Drying Conditions | in a dry air (dessiccant) dryer 70-80 °C for 2-4 h max. moisture content <0,10 % |
Processing Injection Moulding | melt temperature 195-240 °C mould temperature 10-70 °C injection speed high back pressure (hydraulic) >4 bar holding pressure 50-70% of injection pressure press blow molding melt temperature 190-210 °C |
Processing Extrusion | melt temperature 190-230 °C die temperature 190-220 °C |
Storage | dry, protected from light tightly sealed |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.