Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ADVANCENE™ EE-1801-BSB - (PE-LLD) - Egyptian Ethylene and Derivatives Company

Material Data Center offers the following functions for ADVANCENE™ EE-1801-BSB:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Advancene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics単位テスト基準
Other Standards[S]
メルトフローレイト, MFI 1 g/10min
温度 190 °C -
荷重 2.16 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
熱的特性単位テスト基準
Other Standards[S]
溶融温度 120 °C
S: These properties are reported by the producer according standards that are different to our defaults.
光学特性単位テスト基準
ASTM数据
光沢度 47 - ASTM D 2457
ヘイズ 9 % ASTM D 1003
その他の特性.単位テスト基準
密度 918 kg/m³ ASTM D 792
機械的特性(ィルム)単位テスト基準
ASTM Data
破壊応力, 平行 57 MPa ASTM D 882
破壊応力, 直角 38 MPa ASTM D 882
破断伸び, 平行 590 % ASTM D 882
破断伸び, 直角 860 % ASTM D 882
押出成形のタイプ blown - -
試験片の厚さ 0.03 mm -
特殊な特性
成形加工法.
Blown Film Extrusion, フィルム押出成形.
添加剤.
ブロッキング防止剤.
な特性
Barrier Properties, Blending Resin, Good Drawdown
Certifications
Food contact
アプリケーション
パッケージング
領域別の利用可能性
ヨーロッパ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.