Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VALOX™ FR Resin ENH4565 - Americas - PBT-GF33 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for VALOX™ FR Resin ENH4565 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Valox datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
VALOX ENH4565 is a 33% glass reinforced, non-chlorinated/brominated flame retardant Polybutylene Terephthalate (PBT) injection moldable grade with excellent chemical resistance. It has a UL94V0@0.75mm flame rating. This is a good candidate for a variety of applications needing a sustainable FRPBT solution.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 20 cm³/10min ISO 1133
Temperatura 265 °C -
Carico 5 kg -
ASTM Data
Indice di fluidità a caldo, MFI 24 g/10min ASTM D 1238
Temperatura 250 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 11500 MPa ISO 527
Carico unitario a trazione 140 MPa ISO 527
Deformazione a snervamento 2.4 % ISO 527
Carico unitario a rottura 140 MPa ISO 527
Deformazione a rottura 2.4 % ISO 527
Modulo a flessione 9400 MPa ISO 178
Resist. urto Izod con intaglio, +23°C, 4mm 14 kJ/m² ISO 180/1A
Resist. urto Izod con intaglio, -30°C, 4mm 14 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 11600 MPa ASTM D 638
Resistenza alla trazione di snervamento 137 MPa ASTM D 638
Resistenza alla trazione a rottura 137 MPa ASTM D 638
Allungamento a snervamento 2.4 % ASTM D 638
Allungamento a rottura 2.4 % ASTM D 638
Modulo a flessione 9400 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 80 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 60 J/m ASTM D 256
Temperatura -30 °C -
Resistenza all'urto Izod, 1/8 in 800 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 218 °C ASTM D 648
DTUL a 264 psi 206 °C ASTM D 648
Temp.di rammollimento Vicat 205 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.23 % Sim. alla ISO 62
Assorbimento d'umidità 0.06 % Sim. alla ISO 62
Massa volumica 1610 kg/m³ ISO 1183
Densità 1600 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 110 - 120 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 245 - 260 °C -
Temperatura dello stampo 40 - 100 °C -
Temperatura - Zona di Alimentazione 40 - 60 °C -
Zona 1 230 - 240 °C -
Zona 2 235 - 250 °C -
Zona 3 240 - 260 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Additivi
Agente ritardante di fiamma
Caratteristiche speciali
Ritardante di fiamma
Resistenza Chimica
Resistenza chimica generale
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.