Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Filament AM9085F - (PEI+PC) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Filament AM9085F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
3D Data
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
ULTEM™ AM9085F filament is a high performance polyetherimide blend product manufactured from ULTEM™ 9085 resin.  It is available in black and natural (unpigmented) colors.  It provides high heat resistance and mechanical strength, is UL94 V-0 compliant at 1.5 and 3.0 mm (Blue Cards are available on UL IQ Database), and meets FAR 25.853 and OSU 55/55 with low toxicity, smoke, and flame evolution.
3D DataValoreUnitáNorma del test
Other Standards[S]
Modulo a trazione, flat 2180 MPa ASTM D 638
Modulo a trazione, on-edge 2560 MPa ASTM D 638
Modulo a trazione, upright 2440 MPa ASTM D 638
Carico unitario a rottura, flat 62 MPa ASTM D 638
Carico unitario a rottura, on-edge 80 MPa ASTM D 638
Carico unitario a rottura, upright 45 MPa ASTM D 638
Deformazione a rottura, flat 5.1 % ASTM D 638
Deformazione a rottura, on-edge 5.8 % ASTM D 638
Deformazione a rottura, upright 2.3 % ASTM D 638
Modulo a flessione, flat 2130 MPa ASTM D 790
Modulo a flessione, on-edge 2550 MPa ASTM D 790
Modulo a flessione, upright 2070 MPa ASTM D 790
Temp.di inflessione sotto carico, 1.80 MPa, flat 175 °C ASTM D 6484
Temp.di inflessione sotto carico, 1.80 MPa, on-edge 175 °C ASTM D 6484
Temp.di inflessione sotto carico, 1.80 MPa, upright 165 °C ASTM D 6484
Coeff.di dilatazione termica lin., parallelo, flat 57.1 E-6/K ASTM E 831
Coeff.di dilatazione termica lin., parallelo, on-edge 60.6 E-6/K ASTM E 831
Coeff.di dilatazione termica lin., parallelo, upright 62.1 E-6/K ASTM E 831
Coeff.di dilatazione termica lin., perpend., flat 58.3 E-6/K ASTM E 831
Coeff.di dilatazione termica lin., perpend., on-edge 61.1 E-6/K ASTM E 831
Coeff.di dilatazione termica lin., perpend., upright 62.9 E-6/K ASTM E 831
Reazione al fuoco a spessore h, flat V-0 class UL 94
Reazione al fuoco a spessore h, on-edge V-0 class UL 94
Reazione al fuoco a spessore h, upright V-0 class UL 94
Spessore provato 1.5 mm UL 94
Resistività volumica, flat 1.07E13 Ohm*m ASTM D 257
Resistività volumica, on-edge 1.1E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
Caratteristiche
Processabilità e Forma di Forni
Additive Manufacturing
Forma fisica disponibile
Monofilament, Nero, Colore naturale
Caratteristiche speciali
Stabilizzato o stabile al calore
Caratteristiche
Fumo basso
Disponibilità geografica
Nord America, Europa, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.