Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin AUT230 - Americas - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin AUT230 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Transparent polyetherimide (Tg 247C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230C (SABIC Innovative Plastics method)
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 8 cm³/10min ISO 1133
Temperatura 360 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3110 MPa ISO 527
Carico unitario a trazione 95 MPa ISO 527
Deformazione a snervamento 8.5 % ISO 527
Carico unitario a rottura 78 MPa ISO 527
Deformazione a rottura 16.8 % ISO 527
Modulo a flessione 3080 MPa ISO 178
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
Resist. urto Izod con intaglio, +23°C, 4mm 4 kJ/m² ISO 180/1A
Resist. urto Izod con intaglio, -30°C, 4mm 5 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 3510 MPa ASTM D 638
Resistenza alla trazione di snervamento 96 MPa ASTM D 638
Resistenza alla trazione a rottura 96 MPa ASTM D 638
Allungamento a snervamento 6 % ASTM D 638
Allungamento a rottura 25 % ASTM D 638
Modulo a flessione 3170 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 69 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 74 J/m ASTM D 256
Temperatura -30 °C -
Resistenza all'urto Izod, 1/8 in N J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 228 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 242 °C ISO 306
Temp.di rammollimento Vicat, 120°C/h 50N 238 °C ISO 306
ASTM Data
DTUL a 264 psi 217 °C ASTM D 648
Temp.di rammollimento Vicat 242 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 1.75 % Sim. alla ISO 62
Assorbimento d'umidità 0.6 % Sim. alla ISO 62
Massa volumica 1300 kg/m³ ISO 1183
Densità 1300 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 150 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Umidità del Processo ≤0.02 % -
Temperatura di fusione 350 - 400 °C -
Temperatura dello stampo 135 - 165 °C -
Zona 1 330 - 400 °C -
Zona 2 340 - 400 °C -
Zona 3 345 - 400 °C -
Velocità di Rotazione della Vite 40 - 70 rpm -
Contropressione 0.3 - 0.7 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Trasparente
Applicazioni
Automotive
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.