Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Propionate 384A4000016 - CAP - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Propionate 384A4000016:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Proprietà Ottiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers or smoke transparents and black translucent.

Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Propionate 384-16 contains an ultra-violet inhibitor(UVI) and has a plasticizer level of 16%. It is resistant to high temperatures.




Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.004 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 26.9 MPa ASTM D 638
Resistenza alla trazione a rottura 30.3 MPa ASTM D 638
Allungamento a rottura 45 % ASTM D 638
Modulo a flessione 1241 MPa ASTM D 790
Durezza Rockwell R 68 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 533 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 123 J/m ASTM D 256
Temperatura -40 °C -
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
coefficiente d’espansione termica, lung. 140 E-6/K ASTM D 696
DTUL a 66 psi 80 °C ASTM D 648
DTUL a 264 psi 72 °C ASTM D 648
Temp.di rammollimento Vicat 92 °C ASTM D 1525
Conduttività termica, stato solido 0.036 W/(m K) ASTM C 177
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 15.3 kV/mm ASTM D 149
Fattore di dissipazione dielèttrica, 1 MHz 0.08 - ASTM D 150
Costante dielèttrica, 1 MHz 3.55 - ASTM D 150
Resistenza di volume 1E15 Ohm*cm ASTM D 257
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 8.5 % ASTM D 1003
Indice di rifrazione 1.48 - ASTM D 542
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 1.4 % ASTM D 570
Densità 1190 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Estrusione Profilati
Additivi
Plastificante
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore, Trasparente
Caratteristiche
High Gloss
Certifications
Contiene risorse rinnovabili
Applicazioni
Imballaggio, Attrezzature sportive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.