Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TENAC™ 9054 - POM - Asahi Kasei

Material Data Center offers the following functions for TENAC™ 9054:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tenac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 61 cm³/10min ISO 1133
Temperatura 190 °C -
Carico 2.16 kg -
Indice di Fluiditá, MFI 70 g/10min ISO 1133
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3500 MPa ISO 527
Carico unitario a trazione 74 MPa ISO 527
Deformazione a rottura 12 % ISO 527
Modulo a flessione, 23°C 3300 MPa ISO 178
Resistenzia all'urto Charpy con intaglio, +23°C 4 kJ/m² ISO 179/1eA
ASTM Data
Resistenza alla trazione 73 MPa ASTM D 638
Allungamento a rottura 12 % ASTM D 638
Modulo a flessione 3300 MPa ASTM D 790
Resistenza alla flessione 112 MPa ASTM D 790
Durezza Rockwell R 120 - ASTM D 785
Taber abrasione resistenza 13 mg/1000 cycles ASTM D 1044
Resistenza all'urto Izod con intaglio, 1/8 in 37 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 105 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 165 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 100 E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 0.8 mm -
Yellow Card disponibile sì - -
ASTM Data
UL 94 combustibilitá HB - UL 94
coefficiente d’espansione termica, lung. 100 E-6/K ASTM D 696
DTUL a 66 psi 172 °C ASTM D 648
DTUL a 264 psi 136 °C ASTM D 648
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo 18 kV/mm ASTM D 149
Resistenza superficiale 1E17 Ohm ASTM D 257
Resistenza di volume 1E16 Ohm*cm ASTM D 257
Resistenza all’arco 250 s ASTM D 495
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1420 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 0.2 % ASTM D 570
Densità 1420 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 - 90 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Temperatura di fusione 190 - 210 °C -
Temperatura dello stampo 60 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Altre Estrusioni
Forma fisica disponibile
Pellet
Caratteristiche
Alta cristallinità, Omopolimero
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.