Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TechnoPet GF 45 2 0 - PET-GF45 - TechnoCompound GmbH

Material Data Center offers the following functions for TechnoPet GF 45 2 0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Technopet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Proprietà Specifiche Materiale
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.2 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.0 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 18000 MPa ISO 527
Carico unitario a rottura 180 MPa ISO 527
Deformazione a rottura 1.5 % ISO 527
Resistenza all'urto Charpy, +23°C 38 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 38 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 11 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 11 kJ/m² ISO 179/1eA
Ball indentation hardness 280 MPa ISO 2039-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 240 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 225 °C ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa 160 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 255 °C ISO 306
Coeff.di dilatazione termica lin., parallelo 15 E-6/K ISO 11359-1/-2
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 0.8 mm -
Glow Wire Flammability Index (GWFI) 750 °C IEC 60695-2-12
GWFI - thickness tested (1) 2 mm -
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Costante dielettrica relativa, 100Hz 5.2 - IEC 62631-2-1
Costante dielettrica relativa, 1MHz 4.5 - IEC 62631-2-1
Resistività volumica 1E14 Ohm*m IEC 62631-3-1
Resistività superficiale 1E14 Ohm IEC 62631-3-2
Rigidità dielettrica 35 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 250 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.4 % Sim. alla ISO 62
Massa volumica 1730 kg/m³ ISO 1183
Proprietà Specifiche MaterialeValoreUnitáNorma del test
ISO Data
Numero di viscosità 60 cm³/g ISO 307, 1157, 1628
Caratteristiche
Disponibilità geografica
Nord America, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.