Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound 5521 - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound 5521:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
SABIC® PPcompound 5521 is a mineral filled, impact modified polypropylene TPO. This material combines good flow with exterior automotive weathering stability. The general purpose black color product is offered without weathering stability for good paintability. The weatherable product was originally designed for unpainted automotive exterior bumper cap and step pad applications where high flexibility is required. IMDS ID: 163257209
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 19 g/10min ISO 1133
Temperatura 230 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 850 MPa ISO 527
Carico unitario a trazione 18 MPa ISO 527
Deformazione a snervamento 5.5 % ISO 527
Carico unitario a rottura 13 MPa ISO 527
Deformazione a rottura >50 % ISO 527
Modulo a flessione, 23°C 890 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 59 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 7 kJ/m² ISO 179/1eA
Resistenza all'urto Izod con intaglio 9 kJ/m² ISO 180/1A
ASTM Data
Durezza D Shore 57 - ASTM D 2240
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 51 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 86 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 136 °C ISO 306
Altre ProprietàValoreUnitáNorma del test
Massa volumica 900 kg/m³ ISO 1183
Densità 900 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 80 - 100 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 210 - 270 °C -
Temperatura dello stampo 15 - 60 °C -
Zona 1 190 - 230 °C -
Zona 2 200 - 250 °C -
Zona 3 210 - 270 °C -
Temperatura dell ugello 210 - 270 °C -
Contropressione 1 - 1.5 MPa -
Caratteristiche
Caratteristiche speciali
Alto urto o modificato all'urto
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.