Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AESNO MED - PA12 - ARKEMA

Material Data Center offers the following functions for Rilsamid® AESNO MED:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
ISO 16396 - PA12, EG, C22-010

Rilsamid® AESNO MED is a rigid polyamide 12 with high viscosity designed for tube extrusion. This grade, dedicated to extrusion, offers the highest quality and it is specifically designed to meet the stringent requirements of the medical applications such as minimally invasive devices.

Upon request letters regarding USP Class VI compliance can be provided.


Main Application:
· Medical Tubing.
· Catheters.

Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. for any use above this limit, please refer to our technical services.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 8 / * cm³/10min ISO 1133
Temperatura 235 / * °C -
Carico 5 / * kg -
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 1500 / 1440 MPa ISO 527
Carico unitario a trazione 50 / 43 MPa ISO 527
Deformazione a snervamento 5 / 5 % ISO 527
Deformazione nominale a rottura >50 / >50 % ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C - / 11 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C - / 6 kJ/m² ISO 179/1eA
Perforazione-forza massima, -30°C - / 4800 N ISO 6603-2
Energia di perforazione, -30°C - / 60 J ISO 6603-2
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 180 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 55 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 135 / * °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 142 / * °C ISO 306
Coeff.di dilatazione termica lin., parallelo 100 / * E-6/K ISO 11359-1/-2
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica - / 1E12 Ohm*m IEC 62631-3-1
Resistività superficiale * / 1E14 Ohm IEC 62631-3-2
Rigidità dielettrica - / 30 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali - / 600 - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 1.6 / * % Sim. alla ISO 62
Massa volumica 1010 / - kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Estrusione Film, Estrusione Profilati, Estrusione di Lastre/Fogli, Altre Estrusioni
Forma fisica disponibile
Pellet
Certifications
Grado medico, Approvazione della USP class VI
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Estrusione di Profilati

Processing conditions, Extrusion:

- Typical melt temperature (Min / Recommended / Max) : 190°C / 210°C / 230°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65 - 80°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.