Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX870 - Asia - (PPE+PA*)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX870 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
NORYL GTX870 resin is a 20% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX870 resin is an excellent candidate for a wide variety of applications including electrical connectors and electronic base stations.
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Resistenza alla trazione di snervamento 122 MPa ASTM D 638
Allungamento a rottura 5 % ASTM D 638
Modulo a flessione 5680 MPa ASTM D 790
Resistenza alla flessione 166 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 117 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 264 psi 200 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 0.5 % ASTM D 570
Densità 1240 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 95 - 105 °C -
Pre-essiccamento - Tempo 3 - 4 h -
Umidità del Processo ≤0.07 % -
Temperatura di fusione 280 - 305 °C -
Temperatura dello stampo 75 - 120 °C -
Zona 1 265 - 305 °C -
Zona 2 270 - 305 °C -
Zona 3 275 - 305 °C -
Temperatura dell ugello 280 - 305 °C -
Velocità di Rotazione della Vite 20 - 100 rpm -
Contropressione 0.3 - 1.4 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Stabilizzato o stabile al calore
Resistenza Chimica
Resistenza chimica generale
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.