Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer CXT17EX - Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer CXT17EX - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
LEXAN™ CXT17EX resin is a High Heat Polycarbonate Copolymer Resin with Vicat of 170°C and crystal clear transparency. This resin is optimized for sheet and film extrusion applications, has a low plateout and a broad processing window with limited yellowing. It is available in limited transparent colors.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 27 cm³/10min ISO 1133
Temperatura 330 °C -
Carico 2.16 kg -
ASTM Data
Indice di fluidità a caldo, MFI 30 g/10min ASTM D 1238
Temperatura 330 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2450 MPa ISO 527
Carico unitario a trazione 75 MPa ISO 527
Deformazione a snervamento 6.5 % ISO 527
Carico unitario a rottura 60 MPa ISO 527
Deformazione a rottura 50 % ISO 527
Modulo a flessione 2500 MPa ISO 178
Resistenza all'urto Charpy, +23°C, 3mm N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C, 3mm 10 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C, 3mm 7 kJ/m² ISO 179/1eA
Resistenza all'urto Izod, +23°C N kJ/m² ISO 180/1U
Resist. urto Izod con intaglio, +23°C, 3mm 8 kJ/m² ISO 180/1A
Resist. urto Izod con intaglio, -30°C, 3mm 7 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 2500 MPa ASTM D 638
Resistenza alla trazione di snervamento 75 MPa ASTM D 638
Resistenza alla trazione a rottura 60 MPa ASTM D 638
Allungamento a snervamento 7 % ASTM D 638
Allungamento a rottura 40 % ASTM D 638
Modulo a flessione 2450 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 80 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 75 J/m ASTM D 256
Temperatura -30 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 154 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 167 °C ISO 75-1/-2
Temp.di rammollimento Vicat, 120°C/h 50N 174 °C ISO 306
Conduttività termica 0.2 W/(m K) DIN 52616
ASTM Data
DTUL a 66 psi 167 °C ASTM D 648
DTUL a 264 psi 154 °C ASTM D 648
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.3 % Sim. alla ISO 62
Assorbimento d'umidità 0.3 % Sim. alla ISO 62
Massa volumica 1210 kg/m³ ISO 1183
Densità 1210 kg/m³ ASTM D 792
Caratteristiche
Caratteristiche speciali
Trasparente
Applicazioni
Automotive
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.