Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grivory HT1VA-5 FWA black 9225 - PA6T/6I-GF50 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grivory HT1VA-5 FWA black 9225:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Grivory datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Product-nomenclature: ISO16396-PA6T/6I,GF50,M1H,C12-140 

 

Markets

  Automotive
  Air intake sytems, Compressed air systems, Hydraulic systems,
Automotive electr. and electronics, lighting, Cooling and climate control, Fuel systems, Powertrain and Chassis, Interior, Exterior

Approvals

  Food Contact
  NSF 51, EU Requirements, FDA
  Potable Water Contact
  NSF 61, KTW, WRAS, ACS, DVGW W270
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.1 / * % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.5 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 18000 / 18000 MPa ISO 527
Carico unitario a rottura 275 / 260 MPa ISO 527
Deformazione a rottura 2 / 2 % ISO 527
Resistenza all'urto Charpy, +23°C 70 / 70 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 70 / 70 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 12 / 12 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 12 / 12 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 325 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 280 / * °C ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa 200 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 15 / * E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 45 / * E-6/K ISO 11359-1/-2
Reazione al fuoco a spessore h HB / * class IEC 60695-11-10
Spessore provato 0.8 / * mm -
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Resistività volumica 1E10 / 1E10 Ohm*m IEC 62631-3-1
Resistività superficiale * / 1E10 Ohm IEC 62631-3-2
Rigidità dielettrica 32 / 31 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali - / 600 - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 3 / * % Sim. alla ISO 62
Assorbimento d'umidità 1.3 / * % Sim. alla ISO 62
Massa volumica 1640 / - kg/m³ ISO 1183
Caratteristiche
Forma fisica disponibile
Granuli, Nero
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR, Approvato per l'utilizzo per contatto con alimenti secondo la NSF 51, Contatto con acqua potabile, Contacto con acqua potabile KTW, Contatto con acqua potabile DVGW W270, Contatto con acqua potabile NSF 61
Applicazioni
Automotive
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.