Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grivory GC-4H black 9833 - PA*-CF40 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Check here, which other Grivory datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Product-nomenclature: ISO 16396-PA66 PA6I/X,CF40,M1H,C14-250

 

Partially aromatic Polyamide

Product Attributes

Improved heat resistance, Anti-static, Improved UV resistance (outdoor use)

Markets

	Automotive
	Automotive electr. and electronics, lighting, Cooling and climate control, Powertrain and Chassis, Interior
	Electricals & Electronics
	Electrical appliances, Electrical equipment, Connectors, Energy distribution
	Industry & Consumer goods
	Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Power transmission, Sports & Leisure, Tools & Accessories

Caratteristiche Fisiche	secco/cond	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	0.1 / *	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	0.2 / *	%	ISO 294-4, 2577

Proprietà Meccaniche	secco/cond	Unitá	Norma del test
ISO Data
Modulo a trazione	31000 / 28000	MPa	ISO 527
Carico unitario a rottura	260 / 225	MPa	ISO 527
Deformazione a rottura	1.5 / 2	%	ISO 527
Resistenza all'urto Charpy, +23°C	55 / 60	kJ/m²	ISO 179/1eU
Resistenza all'urto Charpy, -30°C	45 / 50	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	7 / 7	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	4 / 4	kJ/m²	ISO 179/1eA

Proprietà Termiche	secco/cond	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	260 / *	°C	ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa	235 / *	°C	ISO 75-1/-2
Temp.di inflessione sotto caricor, 8.00 MPa	175 / *	°C	ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo	10 / *	E-6/K	ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend.	80 / *	E-6/K	ISO 11359-1/-2
Reazione al fuoco a spessore h	HB / *	class	IEC 60695-11-10
Spessore provato	0.8 / *	mm	-

Proprietà Elettriche	secco/cond	Unitá	Norma del test
ISO Data
Rigidità dielettrica	- / 50	kV/mm	IEC 60243-1

Altre Proprietà	secco/cond	Unitá	Norma del test
Assorbimento d'acqua	4.5 / *	%	Sim. alla ISO 62
Assorbimento d'umidità	1.4 / *	%	Sim. alla ISO 62
Massa volumica	1340 / -	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Granuli, Nero

Caratteristiche speciali

Antistatico, Stabilizzato o stabile alla luce, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore

Applicazioni

Automotive, Elettrotecnica ed electrici, Attrezzature sportive

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.