Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GP2300S - PA9T-GF30 FR - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

GENESTAR GP2300S is an injection molding grade with 30% GF developed for reflow applications. It is halogen-free and has a V0 flammability rating.

Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.


GENESTAR GP2300F is suitable for all kind of reflow components such as:

• FPC connectors
• Board-to-board connectors
• wire-to-board connectors
• automotive connectors

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	0.2	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	0.9	%	ISO 294-4, 2577

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	10600	MPa	ISO 527
Carico unitario a rottura	120	MPa	ISO 527
Deformazione a rottura	1.8	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	7.2	kJ/m²	ISO 179/1eA

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	306	°C	ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min	125	°C	ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa	274	°C	ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm	V-0	class	IEC 60695-11-10
Spessore provato	1.5	mm	-
Yellow Card disponibile	sì	-	-
Reazione al fuoco a spessore h	V-0	class	IEC 60695-11-10
Spessore provato	0.4	mm	-
Yellow Card disponibile	sì	-	-

Proprietà Elettriche	Valore	Unitá	Norma del test
ISO Data
Res. Alle correnti striscianti superficiali	600	-	IEC 60112

Altre Proprietà	Valore	Unitá	Norma del test
Assorbimento d'acqua	0.1	%	Sim. alla ISO 62
Massa volumica	1420	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet

Caratteristiche speciali

Ritardante di fiamma, Senza alogeni, Stabilizzato o stabile al calore

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.