Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GN2450-1 - PA9T-GF45 FR - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Genestar GN2450-1 is a 45%GF grade suitable for reflow components.
Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.

The main features of GN2450 are:
　- a High strength
　- a High modulus

GN2450-1 is suitable for FPC sliders and IC sockets.

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	0.2	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	0.6	%	ISO 294-4, 2577
ASTM Data
Indice di fluidità a caldo, MFI	15	g/10min	ASTM D 1238
Temperatura	320	°C	-
Carico	2.16	kg	-

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Carico unitario a rottura	200	MPa	ISO 527
Deformazione a rottura	1.6	%	ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C	14	kJ/m²	ISO 179/1eA
ASTM Data
Resistenza alla trazione	200	MPa	ASTM D 638
Modulo a flessione	14000	MPa	ASTM D 790
Resistenza alla flessione	270	MPa	ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in	105	J/m	ASTM D 256

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	306	°C	ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min	125	°C	ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa	285	°C	ISO 75-1/-2
ASTM Data
UL 94 combustibilitá	V-0	-	UL 94
DTUL a 264 psi	285	°C	ASTM D 648
Temperatura di fusione	306	°C	ASTM D 3418
Temperatura di transizione vetrosa	125	°C	ASTM E 1356

Proprietà Elettriche	Valore	Unitá	Norma del test
ASTM Data
Rigidità elettrica, breve periodo di tempo	30	kV/mm	ASTM D 149
Resistenza di volume	>1E15	Ohm*cm	ASTM D 257

Altre Proprietà	Valore	Unitá	Norma del test
Assorbimento d'acqua	0.1	%	Sim. alla ISO 62
Densità	1730	kg/m³	ASTM D 792

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Caratteristiche speciali

Ritardante di fiamma, Stabilizzato o stabile al calore

Caratteristiche

Saldabile

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.