Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 1185 A WM - (TPU-ARET) - BASF Polyurethanes GmbH

Material Data Center offers the following functions for Elastollan® 1185 A WM:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Altre Proprietà - Funzioni
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
DESCRIPTION
Elastollan 1185 AWM is a polyether based TPU with plasticiser
for matt surfaces

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at
low temperature, resistance to microbiological attack,
good wear performance, high tensile strength, good damping behavior

TYPICAL APPLICATIONS
cable sheathing

OTHER HINTS
predrying: 2-3h at 100-110°C (air circulating oven) or
80-90°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico Unitario al 100% di allungamento 7 MPa ISO 527
Carico Unitario al 300% di allungamento 13 MPa ISO 527
Carico Unitario a rottura TPE 45 MPa ISO 527
Allungamento a rottura TPE >300 % ISO 527
Deformazione residua dopo compressione a 23°C, 24h 20 % ISO 815
Deformazione residua dopo compressione a 70°C, 24h 35 % ISO 815
Resistenza alla lacerazione 55 kN/m ISO 34-1
Resistenza all'abrasione 40 mm³ ISO 4649
Durezza Shore A 87 - ISO 7619-1
Durezza Shore D 39 - ISO 7619-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1150 kg/m³ ISO 1183
Funzioni
Modulo dinamico a taglio-temperatura , Elastollan® 1185 A WM, (TPU-ARET), BASF PU
Sforzi-deformazioni (TPE) , Elastollan® 1185 A WM, (TPU-ARET), BASF PU
Caratteristiche
Processabilità e Forma di Forni
Estrusione Profilati
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.