Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9885DU - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Desmopan 9885DU:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
  • Extrusion- and injection molding grade
  • very good hydrolysis and microbial resistance
  • very good low-temperature impact strength
    Application:
  • Boot shells
  • Technical parts
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico Unitario al 10% di allungamento 52.8 MPa ISO 527
Carico Unitario al 100% di allungamento 43.9 MPa ISO 527
Carico Unitario a rottura TPE 54 MPa ISO 527
Allungamento a rottura TPE >300 % ISO 527
Resistenza alla lacerazione 285 kN/m ISO 34-1
Resistenza all'abrasione 60 mm³ ISO 4649
Durezza Shore D 78 - ISO 7619-1
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di rammollimento Vicat, B 106 °C ISO 306
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1200 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 130 °C -
Pre-essiccamento - Tempo 1 - 2 h -
Umidità del Processo ≤0.05 % -
Temperatura di fusione 240 - 260 °C -
Temperatura dello stampo 70 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione Profilati, Estrusione di Lastre/Fogli, Altre Estrusioni
Forma fisica disponibile
Granuli
Additivi
Agente di distacco
Caratteristiche speciali
Alto urto o modificato all'urto, Estab. agli U.V. o per applicaz.in esterni
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 130 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 220-260 °C
Mold temperature: 70 °C
Altre Estrusioni
PROCESSING
Melt temperature: 215-235 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.