Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Bayblend® FR3021 R30 - (PC+ABS)-T15 FR(40) - Covestro Deutschland AG

Material Data Center offers the following functions for Bayblend® FR3021 R30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Bayblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Preparazione Provette
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
  • (PC+ABS)-Blend
  • 15 % mineral filled
  • with 30 % post consumer recyclate
  • Vicat/B 120 temperature = 98 °C
  • medium viscosity
  • medium modulus
  • low warpage
  • flame-retardant
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 12 cm³/10min ISO 1133
Temperatura 240 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.3 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 0.3 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 4700 MPa ISO 527
Carico unitario a trazione 63 MPa ISO 527
Deformazione a snervamento 2.8 % ISO 527
Resistenza all'urto Charpy, +23°C 106 kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 84 kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 6 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C 5 kJ/m² ISO 179/1eA
Perforazione-forza massima, +23°C 4000 N ISO 6603-2
Energia di perforazione, +23°C 36 J ISO 6603-2
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 86 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 92 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 95 °C ISO 306
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 1.2 mm -
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1310 kg/m³ ISO 1183
Preparazione ProvetteValoreUnitáNorma del test
ISO Data
Stamp. ad Iniezione, temp. di fusione 240 °C ISO 294
Stamp. ad Iniezione, temperatura dello stampo 80 °C ISO 294
Stamp. ad Iniezione, velocità media d'iniezione 240 mm/s ISO 294
Caratteristiche
Caratteristiche speciali
Ritardante di fiamma
Caratteristiche
Bassa deformazione
Certifications
Contenuto di resina riciclata
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.