Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACCUTECH™ CP0437C30L - PP-K - LyondellBasell Industries

Material Data Center offers the following functions for ACCUTECH™ CP0437C30L:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Accutech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Indice di fluidità a caldo, MFI 20 g/10min ASTM D 1238
Ritiro di stampaggio, parallelo 0.01 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 1300 MPa ASTM D 638
Resistenza alla trazione di snervamento 13 MPa ASTM D 638
Resistenza alla trazione a rottura 11 MPa ASTM D 638
Allungamento a snervamento 3 % ASTM D 638
Allungamento a rottura 60 % ASTM D 638
Modulo a flessione 1100 MPa ASTM D 790
Resistenza alla flessione 19 MPa ASTM D 790
Durezza Rockwell R 48 - ASTM D 785
Altre ProprietàValoreUnitáNorma del test
Densità 1010 kg/m³ ASTM D 792
Caratteristiche
Caratteristiche
Copolimero
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.