Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TYRIL™ 867 E UV - SAN - Trinseo

Material Data Center offers the following functions for TYRIL™ 867 E UV:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tyril datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 4 g/10min ISO 1133
Temperatura 230 °C -
Carico 3.8 kg -
ASTM Data
Indice di fluidità a caldo, MFI 4 g/10min ASTM D 1238
Temperatura 230 °C -
Carico 3.8 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 3700 MPa ISO 527
Carico unitario a rottura 70 MPa ISO 527
Resistenza all'urto Charpy, +23°C 17 kJ/m² ISO 179/1eU
Resistenza all'urto Izod, +23°C 14 kJ/m² ISO 180/1U
Durezza Rockwell M83 - ISO 2039-2
ASTM Data
Modulo a trazione 3702 MPa ASTM D 638
Resistenza alla trazione a rottura 70.3 MPa ASTM D 638
Resistenza alla flessione 97.2 MPa ASTM D 790
Durezza Rockwell M 83 - ASTM D 785
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di rammollimento Vicat, A 110 °C ISO 306
Temp.di rammollimento Vicat, B 101 °C ISO 306
Coeff.di dilatazione termica lin., parallelo 50 E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.6 mm -
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 1.6 mm -
Temp.di rammollimento Vicat 101 °C ASTM D 1525
Temperatura specifica 878 J/(kg K) ASTM C 351
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Costante dielettrica relativa, 1MHz 3 - IEC 62631-2-1
Fattore di dissipazione, 1MHz 1 E-4 IEC 62631-2-1
Rigidità dielettrica 9.1 kV/mm IEC 60243-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1080 kg/m³ ISO 1183
Densità 1080 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Estrusione di Lastre/Fogli, Termoformatura
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore, Trasparente
Resistenza Chimica
Resistenza chimica generale
Disponibilità geografica
Europa, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.