Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tritan™ MP150 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Tritan™ MP150:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tritan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Proprietà Meccaniche (Film) - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Eastman Tritan copolyester MP150 is a high flow grade of Eastman Tritan. Eastman Tritan copolyester MP150 has viscosity reductions of 40-50% relative to Eastman Tritan copolyester MP100. It is intended for use in extrusion coating processes or where high melt flow rate is desirable.

Other outstanding features include good toughness, hydrolytic stability, and heat and chemical resistance.

Eastman Tritan copolyester MP150 may be used in food contact applications with restrictions and is compliant with applicable and select sections of USP 35 <661>, ISO10993, and ISO11607.

Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.006 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 1575 MPa ASTM D 638
Resistenza alla trazione di snervamento 43 MPa ASTM D 638
Resistenza alla trazione a rottura 52 MPa ASTM D 638
Allungamento a snervamento 7 % ASTM D 638
Allungamento a rottura 210 % ASTM D 638
Modulo a flessione 1575 MPa ASTM D 790
Durezza Rockwell R 111 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 860 J/m ASTM D 256
Resistenza all'urto Izod, 1/8 in N J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 94 °C ASTM D 648
DTUL a 264 psi 81 °C ASTM D 648
Temperatura di transizione vetrosa 110 °C ASTM E 1356
Proprietà OtticheValoreUnitáNorma del test
ASTM Data
Opacità 1 % ASTM D 1003
Trasmissione luminosa 91 % ASTM D 1003
Altre ProprietàValoreUnitáNorma del test
Densità 1180 kg/m³ ASTM D 792
Proprietà Meccaniche (Film)ValoreUnitáNorma del test
ASTM Data
Modulo a trazione, lung. 979 MPa ASTM D 882
Resistenza alla trazione a rottura, lung. 56.5 MPa ASTM D 882
Allungamento a rottura, lung. 217 % ASTM D 882
Spessore del provino 0.127 mm -
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 88 °C -
Pre-essiccamento - Tempo 4 - 6 h -
Temperatura di fusione 260 - 282 °C -
Temperatura dello stampo 38 - 66 °C -
Caratteristiche
Processabilità e Forma di Forni
Rivestimento, Termoformatura
Caratteristiche speciali
Stabilizzato o stabile al calore, Trasparente
Caratteristiche
Copolimero
Resistenza Chimica
Resistenza chimica generale, Stabilità idrolitica
Certifications
Contatto con gli alimenti, Grado medico, Biocompatibility ISO 10993, Approvazione della USP class VI
Applicazioni
Medicale, Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.