Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Treva™ TR6021 - CAP - Eastman Chemical Co.

Material Data Center offers the following functions for Treva™ TR6021:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Treva datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

Eastman TREVA™ is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact. TREVA is chemically resistant, dimensionally stable and has excellent flow, BPA-free and low birefringence. The United States Department of Agriculture (USDA) BioPreferred® program has Certified Eastman TREVA™ Engineering Bioplastic TR6021 with a biobased content of 42%.

Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.008 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1880 MPa ISO 527
Carico unitario a trazione 47 MPa ISO 527
Deformazione a snervamento 5 % ISO 527
Carico unitario a rottura 44 MPa ISO 527
Deformazione a rottura 41 % ISO 527
Modulo a flessione, 23°C 1730 MPa ISO 178
Resistenza alla flessione 64 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 25 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 14 kJ/m² ISO 180/1A
Temperatura -40 °C -
ASTM Data
Resistenza alla trazione di snervamento 48 MPa ASTM D 638
Resistenza alla trazione a rottura 48 MPa ASTM D 638
Allungamento a rottura 27 % ASTM D 638
Modulo a flessione 2090 MPa ASTM D 790
Durezza Rockwell R 101 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 192 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 105 J/m ASTM D 256
Temperatura -40 °C -
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 66 psi 115 °C ASTM D 648
DTUL a 264 psi 99 °C ASTM D 648
Temp.di rammollimento Vicat 130 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Biobased content 42 % -
Assorbimento d’acqua, 24hr 2.2 % ASTM D 570
Densità 1220 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 75 °C -
Pre-essiccamento - Tempo 4 h -
Temperatura di fusione 260 °C -
Temperatura dello stampo 85 °C -
Velocità di iniezione 30 mm/s -
Tempo di residenza, massimo 4 min -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Trasparente
Caratteristiche
Basso birifrangenza
Resistenza Chimica
Resistenza chimica generale
Certifications
Contiene risorse rinnovabili
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.