Any use of this information falls under the rules of our
disclaimer.
Caratteristiche Fisiche | Valore | Unitá | Norma del test |
ISO Data |
Indice di Fluiditá, MFI |
4 |
g/10min |
ISO 1133 |
Temperatura |
190 |
°C |
- |
Carico |
2.16 |
kg |
- |
Proprietà Meccaniche | Valore | Unitá | Norma del test |
ISO Data |
Durezza Shore D |
48 |
- |
ISO 7619-1 |
Proprietà Termiche | Valore | Unitá | Norma del test |
ISO Data |
Temp.di rammollimento Vicat, A |
92 |
°C |
ISO 306 |
Proprietà Ottiche | Valore | Unitá | Norma del test |
ISO Data |
Opacità |
8 |
- |
ISO 14782 |
Altre Proprietà | Valore | Unitá | Norma del test |
Massa volumica |
922 |
kg/m³ |
ISO 1183 |
Proprietà Meccaniche (Film) | Valore | Unitá | Norma del test |
ISO Data |
Carico massimo, parallel |
22 |
MPa |
ISO 527-3 |
Carico massimo, perpend. |
16 |
MPa |
ISO 527-3 |
Allungamento massimo, parallelo |
390 |
% |
ISO 527-3 |
Allungamento massimo, perpend. |
590 |
% |
ISO 527-3 |
Prova di caduta del dardo A |
80 |
g |
ISO 7765-1 |
Tipo di estrusione |
blown |
- |
- |
Spessore del provino |
0.04 |
mm |
- |
Raccomandazione de Processabilità Stampaggio ad Iniezione | Valore | Unitá | Norma del test |
Temperatura di fusione |
170 - 190 |
°C |
- |
Raccomandazione de Processabilità Estrusione | Valore | Unitá | Norma del test |
Temperatura di fusione |
150 - 190 |
°C |
- |
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione di film in bolla, Estrusione Film
Forma fisica disponibile
Pellet
Caratteristiche speciali
Trasparente
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti secondo 1935/2004/EG, Approvato per l'utilizzo per contatto con alimenti 10/2011, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR, RoHS
Applicazioni
Elettrotecnica ed electrici, Medicale, Imballaggio, Giocattoli
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com