Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TEREZ® GT3X 300 H G30 - (PA66+PA6I/6T)-GF30 - Ter Plastics

Material Data Center offers the following functions for TEREZ® GT3X 300 H G30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Terez datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Partially aromatic PA66 blend with 30% glass fiber proportions and heat stabilized. The product tends to reduced warpage and has improved flow characteristics.
For injection-moulded components with high requirements to isotropic strength properties.

preliminary data
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione 10800 / 11000 MPa ISO 527
Carico unitario a rottura 215 / 200 MPa ISO 527
Deformazione a rottura 3 / 4 % ISO 527
Resistenza all'urto Charpy, +23°C 80 / N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 11 / 12 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 260 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 235 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 245 / * °C ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB / * class IEC 60695-11-10
Spessore provato 1.6 / * mm -
Proprietà Elettrichesecco/condUnitáNorma del test
ISO Data
Rigidità dielettrica 33 / - kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 600 / - - IEC 60112
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 4.8 / * % Sim. alla ISO 62
Assorbimento d'umidità 1.8 / * % Sim. alla ISO 62
Massa volumica 1340 / - kg/m³ ISO 1183
Caratteristiche
Caratteristiche speciali
Stabilizzato o stabile al calore
Caratteristiche
Bassa deformazione
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.