Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TAIRILAC® AG23AT-M - ABS - Formosa Chemicals & Fibre Corp.

Material Data Center offers the following functions for TAIRILAC® AG23AT-M:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tairilac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 21 g/10min ISO 1133
Temperatura 220 °C -
Carico 10 kg -
ASTM Data
Indice di fluidità a caldo, MFI 21 g/10min ASTM D 1238
Temperatura 220 °C -
Carico 10 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 44 MPa ISO 527
Modulo a flessione, 23°C 2250 MPa ISO 178
Resistenza alla flessione 64 MPa ISO 178
Durezza Rockwell R 107 - ISO 2039-2
ASTM Data
Resistenza alla trazione 44.1 MPa ASTM D 638
Modulo a flessione 2305 MPa ASTM D 790
Resistenza alla flessione 73.6 MPa ASTM D 790
Durezza Rockwell R 107 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/4 in 284 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 89 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 95 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm -
Yellow Card disponibile sì - -
ASTM Data
UL 94 combustibilitá HB - UL 94
Spessore testati 1.5 mm -
DTUL a 264 psi 89 °C ASTM D 648
Temp.di rammollimento Vicat 95 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1040 kg/m³ ISO 1183
Densità 1040 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 70 - 80 °C -
Pre-essiccamento - Tempo 2 - 3 h -
Temperatura di fusione 190 - 230 °C -
Temperatura dello stampo 40 - 80 °C -
Pressione di Iniezione 70 - 110 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Galvanizzabile, Alto urto o modificato all'urto
Disponibilità geografica
Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.