Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AESN BLACK P110 TL - PA12 - ARKEMA

Material Data Center offers the following functions for Rilsamid® AESN BLACK P110 TL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
ISO 16396 - PA12-Hl, EGHL, C24-010

Rilsamid® AESN BLACK P110 TL resin is a semi-rigid polyamide with improved hydrolysis and impact resistance.
This black colored grade is designed for tube extrusion.


Main applications:
  • Fuel line
  • Tubing for use in motor vehicules

Pacakaging:
This material is delivered in sealed packaging (800 kg rigid containers) ready to be procesded.

Shelf life:
Two years from date of delivery. For any use above this limit, please refer to our technical services.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 0.4 / * cm³/10min ISO 1133
Temperatura 275 / * °C -
Carico 5 / * kg -
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Modulo a trazione - / 1120 MPa ISO 527
Carico unitario a trazione - / 32 MPa ISO 527
Deformazione a snervamento - / 13 % ISO 527
Deformazione nominale a rottura - / >50 % ISO 527
Resistenzia all'urto Charpy con intaglio, +23°C - / 75 kJ/m² ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C - / 18 kJ/m² ISO 179/1eA
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 176 / * °C ISO 11357-1/-3
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1000 / 1000 kg/m³ ISO 1183
Caratteristiche
Processabilità e Forma di Forni
Estrusione Profilati, Altre Estrusioni, Soffiaggio
Forma fisica disponibile
Pellet, Nero
Additivi
Lubrificanti
Caratteristiche speciali
Alto urto o modificato all'urto, Stabilizzato o stabile alla luce, Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Altre Estrusioni

Processing conditions for extrusion :

- Typical melt temperature (Min / Recommended / Max) : 260°C / 270°C / 280°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.