Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Nymax™ GMF604 40 UV black 148 - PA6-(GF+MX)40 - Avient Corporation

Material Data Center offers the following functions for Nymax™ GMF604 40 UV black 148:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Nymax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ASTM Data
Ritiro di stampaggio, parallelo 0.003 mm/mm ASTM D 955
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 8500 MPa ISO 527
Carico unitario a trazione 117 MPa ISO 527
Modulo a flessione, 23°C 8400 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 13 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 8270 MPa ASTM D 638
Resistenza alla trazione di snervamento 121 MPa ASTM D 638
Resistenza alla trazione a rottura 117 MPa ASTM D 638
Allungamento a rottura 2.5 % ASTM D 638
Modulo a flessione 7580 MPa ASTM D 790
Resistenza alla flessione 179 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 69 J/m ASTM D 256
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 1 % Sim. alla ISO 62
Massa volumica 1490 kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 0.8 % ASTM D 570
Densità 1480 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 82.2 °C -
Pre-essiccamento - Tempo 4 h -
Temperatura dello stampo 48.9 °C -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet, Nero
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Stabilizzato o stabile al calore
Applicazioni
Automotive, Costruzione, Polivalente
Disponibilità geografica
Nord America, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.