Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of MABLEX® 319V0 - (PC+ABS)-GF20 - Ravago Group

Material Data Center offers the following functions for MABLEX® 319V0:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Mablex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 10 g/10min ISO 1133
Temperatura 260 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.2 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a rottura 70 MPa ISO 527
Deformazione a rottura 4 % ISO 527
Modulo a flessione, 23°C 5000 MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 10 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 5 kJ/m² ISO 180/1A
Temperatura -30 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 118 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 135 °C ISO 306
Temp.di rammollimento Vicat, B 127 °C ISO 306
Reaz. al fuoco spess.nom. 1.5mm V-0 class IEC 60695-11-10
Spessore provato 1.6 mm -
Yellow Card disponibile - -
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 3.2 mm -
Yellow Card disponibile - -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 2 mm -
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E12 Ohm*m IEC 62631-3-1
Resistività superficiale 1E14 Ohm IEC 62631-3-2
Rigidità dielettrica 33 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 175 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1350 kg/m³ ISO 1183
Caratteristiche
Caratteristiche speciali
Ritardante di fiamma
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.