Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXD9332T - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXD9332T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Estrusione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
LEXAN FXD9332T  is based on Polycarbonate (PC) siloxane copolymer resin. It is a flame-retardant and UV stabilized resin suitable for extrusion. This resin is available in a single translucent color and enables a medium fine surface texture when extruded in sheet, pipe and profiles. This flame retardant resin is EN45545 R4 compliant and is targeted for train lighting cover applications (category R4).
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 7 cm³/10min ISO 1133
Temperatura 300 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 0.7 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 2450 MPa ISO 527
Carico unitario a trazione 70 MPa ISO 527
Deformazione a snervamento 6 % ISO 527
Carico unitario a rottura 55 MPa ISO 527
Deformazione a rottura >50 % ISO 527
Modulo a flessione, 23°C 2400 MPa ISO 178
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C 100 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 5 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 4 kJ/m² ISO 179/1eA
Resistenza all'urto Izod, +23°C N kJ/m² ISO 180/1U
Resistenza all'urto Izod con intaglio, +23°C 6 kJ/m² ISO 180/1A
Resistenza all'urto Izod con intaglio 5 kJ/m² ISO 180/1A
Temperatura -30 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 120 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 131 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 136 °C ISO 306
Indice di ossigeno 36 % ISO 4589-1/-2
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1250 kg/m³ ISO 1183
Raccomandazione de Processabilità EstrusioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 120 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 260 - 300 °C -
Zona 1 260 - 300 °C -
Zona 2 260 - 290 °C -
Zona 3 260 - 290 °C -
Temperatura dell ugello 240 - 280 °C -
Caratteristiche
Processabilità e Forma di Forni
Estrusione di tubi, Estrusione Profilati, Estrusione di Lastre/Fogli
Caratteristiche speciali
Ritardante di fiamma, Estab. agli U.V. o per applicaz.in esterni, Translucent
Caratteristiche
Copolimero
Applicazioni
Elettrotecnica ed electrici
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.