Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1240MGHL BK - PA66-(GF+MX)40 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1240MGHL BK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.6 / * % ISO 294-4, 2577
ASTM Data
Ritiro di stampaggio, parallelo 0.0055 mm/mm ASTM D 955
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Carico unitario a trazione 113 / - MPa ISO 527
Modulo a flessione, 23°C 8400 / - MPa ISO 178
Resistenza all'urto Izod con intaglio, +23°C 4.2 / - kJ/m² ISO 180/1A
ASTM Data
Resistenza alla trazione di snervamento 114 / - MPa ASTM D 638
Allungamento a rottura 1.8 / - % ASTM D 638
Modulo a flessione 8620 / - MPa ASTM D 790
Resistenza alla flessione 172 / - MPa ASTM D 790
Durezza Rockwell M 98 / - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 53 / - J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
DTUL a 264 psi 229 °C ASTM D 648
Altre Proprietàsecco/condUnitáNorma del test
Massa volumica 1490 / - kg/m³ ISO 1183
Assorbimento d’acqua, 24hr 0.8 % ASTM D 570
Densità 1490 kg/m³ ASTM D 792
Caratteristiche
Forma fisica disponibile
Pellet, Nero
Additivi
Lubrificanti
Caratteristiche speciali
Stabilizzato o stabile al calore
Caratteristiche
Bassa deformazione
Applicazioni
Automotive
Disponibilità geografica
Nord America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.