Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FORTRON® FX72T6 - PPS - Celanese

Material Data Center offers the following functions for FORTRON® FX72T6:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fortron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
Fortron® FX72T6 is an unreinforced, impact modified PPS with high flowability and high impact resistance suitable for injection molding.
The mechanical properties reported on this data sheet refer to a mold wall temperature of 135°C.

Flammability at thickness h (3 mm)V-0-
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 1.3 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.3 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1680 MPa ISO 527
Carico unitario a rottura 40 MPa ISO 527
Deformazione a rottura 20 % ISO 527
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C 10 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 100 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 122 °C ISO 306
Reazione al fuoco a spessore h V-0 class IEC 60695-11-10
Spessore provato 3.0 mm -
Indice di ossigeno 48.5 % ISO 4589-1/-2
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Costante dielettrica relativa, 1MHz 3.1 - IEC 62631-2-1
Fattore di dissipazione, 1MHz 3 E-4 IEC 62631-2-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1180 kg/m³ ISO 1183
Funzioni
Sforzi-deformazione , FORTRON® FX72T6, PPS, Celanese
Modulo secante-deformazione , FORTRON® FX72T6, PPS, Celanese
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Alto urto o modificato all'urto
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.