Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® SC698 NC010 - POM-Z - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect. 

SPECIAL CONTROL for HEALTHCARE APPLICATIONS
This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.  This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.  For details, individual compliance statements are available from your DuPont representative.

Caratteristiche Fisiche	Valore	Unitá	Norma del test
ISO Data
Ritiro di stampaggio, parallelo	1.6	%	ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare	1.8	%	ISO 294-4, 2577

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	3100	MPa	ISO 527
Carico unitario a trazione	65	MPa	ISO 527
Deformazione a snervamento	11	%	ISO 527
Deformazione nominale a rottura	20	%	ISO 527
Resistenza all'urto Charpy, +23°C	150	kJ/m²	ISO 179/1eU
Resistenza all'urto Charpy, -30°C	150	kJ/m²	ISO 179/1eU
Resistenzia all'urto Charpy con intaglio, +23°C	4	kJ/m²	ISO 179/1eA
Resistenzia all'urto Charpy con intaglio, -30°C	4	kJ/m²	ISO 179/1eA

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	178	°C	ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa	97	°C	ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo	120	E-6/K	ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend.	120	E-6/K	ISO 11359-1/-2

Altre Proprietà	Valore	Unitá	Norma del test
Massa volumica	1440	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Forma fisica disponibile

Pellet, Colore naturale

Additivi

Lubrificanti, Agente di distacco

Caratteristiche

Grado tribologico, Omopolimero

Certifications

Contatto con gli alimenti

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.