Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of COOLPOLY® E5101 - PPS - Celanese

Check here, which other CoolPoly datasheets, application examples or technical articles are available in Material Data Center

Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà - Funzioni

Any use of this information falls under the rules of our disclaimer.

Testo del prodotto

CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The E series is electrically conductive and provides inherent EMI/RFI shielding characteristics.

Flammability at thickness h (1 mm)

V-0

-

Proprietà Meccaniche	Valore	Unitá	Norma del test
ISO Data
Modulo a trazione	11600	MPa	ISO 527
Carico unitario a rottura	44	MPa	ISO 527
Deformazione a rottura	0.43	%	ISO 527
Resistenza all'urto Charpy, +23°C	3.5	kJ/m²	ISO 179/1eU

Proprietà Termiche	Valore	Unitá	Norma del test
ISO Data
Temperatura di fusione, 10°C/min	280	°C	ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa	248	°C	ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa	279	°C	ISO 75-1/-2
Reazione al fuoco a spessore h	V-0	class	IEC 60695-11-10
Spessore provato	1.0	mm	-

Proprietà Elettriche	Valore	Unitá	Norma del test
ISO Data
Resistività volumica	0.0017	Ohm*m	IEC 62631-3-1

Altre Proprietà	Valore	Unitá	Norma del test
Assorbimento d'acqua	0.05	%	Sim. alla ISO 62
Massa volumica	1710	kg/m³	ISO 1183

Funzioni

Caratteristiche

Processabilità e Forma di Forni

Stampaggio ad Iniezione

Caratteristiche speciali

Migliorata conduttività elettrica, Termico Conduttivo

Caratteristiche

Schermatura EMI

Disponibilità geografica

Nord America, Europa, Asia Oceano Pacifico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.