Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Asaflex™ 805 - TPS - Asahi Kasei

Material Data Center offers the following functions for Asaflex™ 805:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Asaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Ottiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 10 g/10min ISO 1133
Temperatura 200 °C -
Carico 5 kg -
Ritiro di stampaggio, parallelo 0.5 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Resistenza a trazione 33 MPa ISO 527
Modulo a flessione, 23°C 1550 MPa ISO 178
Resistenza alla flessione 50 MPa ISO 178
Resistenza all'urto Charpy, +23°C 16 kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 1.3 kJ/m² ISO 179/1eA
Durezza Shore D 75 - ISO 7619-1
Durezza Rockwell R 68 - ISO 2039-2
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 63 °C ISO 75-1/-2
Temp.di rammollimento Vicat, A 91 °C ISO 306
Proprietà OtticheValoreUnitáNorma del test
ISO Data
Opacità 0.5 - ISO 14782
Other Standards[S]
Trasmissione luminosa 90 % ISO 13468
S: These properties are reported by the producer according standards that are different to our defaults.
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.1 % Sim. alla ISO 62
Massa volumica 1020 kg/m³ ISO 1183
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Temperatura di fusione 180 - 220 °C -
Temperatura dello stampo 50 °C -
Zona 1 180 - 200 °C -
Temperatura dell ugello 200 °C -
Pressione di Iniezione 67 MPa -
Contropressione 6 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Caratteristiche speciali
Trasparente
Caratteristiche
High Gloss, Copolimero
Resistenza Chimica
Resistenza alla radiazione
Certifications
Contatto con gli alimenti, Approvato per l'utilizzo per contatto con alimenti 10/2011, Approvato per l'utilizzo per contatto con alimenti secondo la FDA 21 CFR
Applicazioni
Imballaggio
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.