Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrathene UE672317 - EVAC - LyondellBasell Industries

Material Data Center offers the following functions for Ultrathene UE672317:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrathene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés thermiques - Propriétés optiques - Propriétés mécaniques (Grades film)
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 0.5 g/10min ASTM D 1238
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
Température de fusion 94.4 °C ASTM D 3418
Vicat température 80 °C ASTM D 1525
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Brillant 88 - ASTM D 2457
Haze 1.5 % ASTM D 1003
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité, long. 6.62 MPa ASTM D 882
Module de traction d’élasticité, trav. 5.52 MPa ASTM D 882
Résistance de traction à la rupture, long. 30.5 MPa ASTM D 882
Résistance de traction à la rupture, trav. 29.8 MPa ASTM D 882
Allongement d’élasticité, long. 18 % ASTM D 882
Allongement d’élasticité, trav. 16 % ASTM D 882
Allongement à la rupture, long. 300 % ASTM D 882
Allongement à la rupture, trav. 600 % ASTM D 882
Caractéristiques
Transformation
Moulage par injection, Extrusion de films, Soufflage
Additifs
Agent antiadhérent
Caractéristiques
Copolymère
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.