Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4330 G6 HR High Speed - PBT-I-GF30 - BASF

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Propriétés spécifiques à la matière - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

Easy flowing injection-moulding grade containing 30% glass-fibres, for rigid,tough and dimensionally stable technical parts, used in applications with highest demands on hydrolysis resistance such es automotive connectors and housings for electronic units under the hood.
The black colored product Ultradur® B4330 G6 HR High Speed BK15045 has a LS coloration (Laser Sensitive) and can be marked with Nd:YAG lasers.


Abbreviated designation according to ISO 1043: PBT-I-GF30

Caractéristiques des transformations/physiques	Valeur	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	28	cm³/10min	ISO 1133
Température	275	°C	-
Charge	2.16	kg	-
Retrait au moulage, parallèle	0.4	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	1.0	%	ISO 294-4, 2577

Propriétés mécaniques	Valeur	Unité	Norme du test
ISO Data
Module en traction	8880	MPa	ISO 527
Contrainte à la rupture	130	MPa	ISO 527
Déformation à la rupture	2.6	%	ISO 527
Résistance au choc Charpy, +23°C	68	kJ/m²	ISO 179/1eU
Résistance au choc Charpy, -30°C	52	kJ/m²	ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C	9	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	7.8	kJ/m²	ISO 179/1eA

Propriétés thermiques	Valeur	Unité	Norme du test
ISO Data
Température de fusion, 10°C/min	223	°C	ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa	205	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	223	°C	ISO 75-1/-2
Inflammabilité ep. nom. 1.5 mm	HB	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.5	mm	-
Yellow Card disponible	oui	-	-
Inflammabilité pr. épaisseur h	HB	class	IEC 60695-11-10
Epaisseur de l'éprouvette	0.8	mm	-
Yellow Card disponible	oui	-	-

Propriétés diverses	Valeur	Unité	Norme du test
Masse volumique	1500	kg/m³	ISO 1183

Propriétés spécifiques à la matière	Valeur	Unité	Norme du test
ISO Data
Indice de viscosité	85	cm³/g	ISO 307, 1157, 1628

Fonctions

Caractéristiques

Transformation

Moulage par injection

Propriétés spéciales

Modifié choc

Résistance Chimique

Stabilité hydrolytique

Applications

Automobile, Électrotechnique et électrique

Autres informations

Moulages par injection

PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 280 °C
injection molding, Melt temperature, recommended: 260 °C
injection molding, Mold temperature, range: 60 - 100 °C
injection molding, Mold temperature, recommended: 80 °C

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.