Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TECACOMP® PK TRM XS black 4179 - PK-CF - Ensinger Compounds

Material Data Center offers the following functions for TECACOMP® PK TRM XS black 4179:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tecacomp datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 12.5 cm³/10min ISO 1133
Température 240 °C -
Charge 2.16 kg -
Indice de fluidité, MFI 14.5 g/10min ISO 1133
Température 240 °C -
Charge 2.16 kg -
Retrait au moulage, parallèle 0.4 % ISO 294-4, 2577
Retrait au moulage, perpendiculaire 1.1 % ISO 294-4, 2577
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 9800 MPa ISO 527
Résistance à la traction 130 MPa ISO 527
Déformation à la rupture 2.5 % ISO 527
Résistance au choc Charpy, +23°C 40 kJ/m² ISO 179/1eU
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 220 °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 15 °C ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa 213 °C ISO 75-1/-2
Coeffic. de dilatation therm. linéique, parallèle 61 E-6/K ISO 11359-1/-2
Coeffic. de dilatation therm. linéique, perpend. 104 E-6/K ISO 11359-1/-2
Inflammabilité pr. épaisseur h HB class IEC 60695-11-10
Propriétés électriquesValeurUnitéNorme du test
Other Standards[S]
Résistivité transversale 1300 Ohm*m ISO 3915
S: These properties are reported by the producer according standards that are different to our defaults.
Propriétés diversesValeurUnitéNorme du test
Absorption d'humidité 0.4 % Sim. to ISO 62
Masse volumique 1300 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 2 - 3 h -
Température du moule 120 °C -
Zone 1 220 - 250 °C -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Noir
Caractéristiques
Grade tribologique
Applications
Automobile
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.