Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PP 58MNK10 - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PP 58MNK10:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques
Any use of this information falls under the rules of our disclaimer.
Informations produit
This grade combines an excellent stiffnesswith high impact resistance. It has a low tendency to warp. Excellent flow in combination with high crystallisation speed enables outstanding processability aiming at easy mould filling and short cycle times. Thanks to the mentioned performance this grade is typically used in several kinds of containers. The excellent gloss level makes this material also favourable for household applications. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.comThis product is not intended for and must not be used in any pharmaceutical/medical applications. This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1550 MPa ISO 527
Contrainte d'écoulement 27 MPa ISO 527
Déformation au seuil d'écoulement 4 % ISO 527
Résistance au choc Charpy (entaillé), +23°C 12.5 kJ/m² ISO 179/1eA
Résistance au choc Izod avec entaille 6 kJ/m² ISO 180/1A
Dureté Shore D 65 - ISO 7619-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 60 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 100 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 151 °C ISO 306
Température de ramolliss. Vicat, B 80 °C ISO 306
Caractéristiques
Certifications
Contact alimentaire
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.