Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PC Resin PC4800 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PC Resin PC4800 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés optiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
PC4800 resin is a very high flow (MFR = 8.0 at 250C/1.2kg) polycarbonate product designed for use in the optical media market. It is available exclusively at www.sabicpc.com.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 7 cm³/10min ISO 1133
Température 250 °C -
Charge 1.2 kg -
ASTM Data
Indice de fluidité, MFI 8 g/10min ASTM D 1238
Température 250 °C -
Charge 1.2 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 2350 MPa ISO 527
Contrainte d'écoulement 60 MPa ISO 527
Déformation au seuil d'écoulement 6 % ISO 527
Déformation à la rupture 40 % ISO 527
Module de flexion 2300 MPa ISO 178
ASTM Data
Module en traction 2350 MPa ASTM D 638
Module de traction d’élasticité 60 MPa ASTM D 638
Allongement d’élasticité 6 % ASTM D 638
Allongement à la rupture 40 % ASTM D 638
Module de flexion 2300 MPa ASTM D 790
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 122 °C ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa 132 °C ISO 75-1/-2
Température de ramolliss. Vicat, B 138 °C ISO 306
Conductivité thermique 0.2 W/(m K) DIN 52616
ASTM Data
DTUL à 66 psi 132 °C ASTM D 648
DTUL à 264 psi 122 °C ASTM D 648
Vicat température 138 °C ASTM D 1525
Conductivité thermique, l'état solide 0.0288 W/(m K) ASTM C 177
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Permittivité relative, 1MHz 3 - IEC 62631-2-1
Facteur de pertes, 1MHz 100 E-4 IEC 62631-2-1
Résistivité transversale >1E13 Ohm*m IEC 62631-3-1
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Haze 0.7 % ASTM D 1003
Lumière á Transmittance 90 % ASTM D 1003
Indice de réfraction 1.59 - ASTM D 542
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.35 % Sim. to ISO 62
Masse volumique 1200 kg/m³ ISO 1183
Absorption d’eau, équilibre 0.35 % ASTM D 570
Densité 1200 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température ≤120 °C -
Pré-séchage - temps 4 - 6 h -
Température de la matière fondue 340 - 370 °C -
Température du moule 75 - 95 °C -
Zone 1 270 - 290 °C -
Zone 2 320 - 340 °C -
Zone 3 350 - 380 °C -
Température de la buse 340 - 370 °C -
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.