Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® Clear G170 - PA* - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Fonctions

Any use of this information falls under the rules of our disclaimer.

Informations produit

PA,,MT,C12-020

Rilsan^® Clear G170 is a high performance transparent polyamide resin with outstanding thermal resistance.  This grade has been designed for injection molding applications.

Main applications:

• Coffee machine, Fuel filter container, Inner layer of fiber optic, Copper telephone cables resistant to rodents, power cables resistant to rodents.
• Note: This grade is not recommended by Arkema for usage in medical applications. For such applications Rilsan^® Clear G170 MED should be used.

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Caractéristiques des transformations/physiques	sec / cond	Unité	Norme du test
ISO Data
Indice de fluidité à chaud en volume, MVR	2 / *	cm³/10min	ISO 1133
Température	275 / *	°C	-
Charge	2.16 / *	kg	-
Retrait au moulage, parallèle	0.7 / *	%	ISO 294-4, 2577
Retrait au moulage, perpendiculaire	0.7 / *	%	ISO 294-4, 2577

Propriétés mécaniques	sec / cond	Unité	Norme du test
ISO Data
Module en traction	2100 / 2020	MPa	ISO 527
Contrainte d'écoulement	76 / 74	MPa	ISO 527
Déformation au seuil d'écoulement	8 / 9	%	ISO 527
Déformation nominale à la rupture	>50 / >50	%	ISO 527
Résistance au choc Charpy (entaillé), +23°C	- / 13	kJ/m²	ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C	- / 13	kJ/m²	ISO 179/1eA
Dureté Shore D	79 / *	-	ISO 7619-1

Propriétés thermiques	sec / cond	Unité	Norme du test
ISO Data
Température de transition vitreuse, 10°C/min	168 / *	°C	ISO 11357-1/-2
Température de fléchissement s/chrg, 1.80 MPa	136 / *	°C	ISO 75-1/-2
Température de fléchissement s/chrg, 0.45 MPa	150 / *	°C	ISO 75-1/-2
Température de ramolliss. Vicat, B	160 / *	°C	ISO 306
Coeffic. de dilatation therm. linéique, parallèle	70 / *	E-6/K	ISO 11359-1/-2
Inflammabilité ep. nom. 1.5 mm	V-2 / *	class	IEC 60695-11-10
Epaisseur de l'éprouvette	1.6 / *	mm	-
Yellow Card disponible	oui / *	-	-
Aptitude à l'allumage	26 / *	%	ISO 4589-1/-2

Propriétés électriques	sec / cond	Unité	Norme du test
ISO Data
Résistivité transversale	- / 1E11	Ohm*m	IEC 62631-3-1
Résistivité superficielle	* / 1E12	Ohm	IEC 62631-3-2
Rigidité diélectrique	- / 50	kV/mm	IEC 60243-1
Indice de résistance au cheminement	* / 600	-	IEC 60112

Propriétés diverses	sec / cond	Unité	Norme du test
Absorption d'eau	3.8 / *	%	Sim. to ISO 62
Absorption d'humidité	1.7 / *	%	Sim. to ISO 62
Masse volumique	1050 / 1050	kg/m³	ISO 1183

Fonctions

Caractéristiques

Transformation

Moulage par injection, Extrusion (autres)

Conditionnement

Granulés

Propriétés spéciales

Transparent

Disponibilité régionale

Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique

Autres informations

Moulages par injection

Injection molding conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 290°C / 310°C.
- Typical mold temperature  : 40 - 80 °C.
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C.

Extrusion de films

Extrusion conditions:
- Typical melt temperature  (Min / Recommended / Max)  : 270°C / 280°C / 290°C
- Dyring time and temperature (only for bags opened for more than two hours): 4 - 6 hours at 90°C

Conditions générales

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.