Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NYLENE® CPNX3411 - PA6 - Polymeric Resources Corporation

Material Data Center offers the following functions for NYLENE® CPNX3411:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Nylene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1130 kg/m³ ISO 1183
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ASTM Data
Module de traction, long. 60 MPa ASTM D 882
Module de traction d’élasticité, long. 38 MPa ASTM D 882
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 82 °C -
Pré-séchage - temps 2 - 4 h -
Température de la matière fondue 288 - 302 °C -
Température - Zone d'alimentation 260 - 277 °C -
Zone 1 271 - 293 °C -
Zone 2 288 - 302 °C -
Température de la buse 288 - 302 °C -
Caractéristiques
Transformation
Extrusion a film soufflé, Extrusion de films
Caractéristiques
Propriétés barrière, Tenue de la matière à l’état fondu, Copolymère
Résistance Chimique
Résistance aux graisses
Certifications
Contact alimentaire, FDA 21 CFR approbation
Applications
Emballage
Disponibilité régionale
Amérique du nord
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.