Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin ZM3640 - Asia - (PPE+PS)-MF - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin ZM3640 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL™ ZM3640 resin is a mineral reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This grade contains non-brominated, non-chlorinated flame retardant and has a UL94 flame rating of V1 at 1.5mm. NORYL ZM3640 resin exhibits high heat resistance, low warpage, good dimensional stability and is an excellent candidate for printer chassis applications.

UL Yellow Card Link E207780-100140832
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 24 g/10min ASTM D 1238
Température 300 °C -
Charge 2.16 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de traction d’élasticité 60 MPa ASTM D 638
Allongement à la rupture 4 % ASTM D 638
Izod choc avec entaille, 1/8 in 35 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Inflammabilité ep. nom. 1.5 mm V-1 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Propriétés diversesValeurUnitéNorme du test
Densité 1220 kg/m³ ASTM D 792
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 90 - 95 °C -
Pré-séchage - temps 3 - 4 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 255 - 280 °C -
Température du moule 65 - 90 °C -
Zone 1 220 - 270 °C -
Zone 2 230 - 275 °C -
Zone 3 245 - 280 °C -
Vitesse de rotation de vis 20 - 100 rpm -
Contre-pression 0.3 - 0.7 MPa -
Caractéristiques
Transformation
Moulage par injection
Additifs
Agent ignifugeant
Propriétés spéciales
Ignifugé
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.