Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin WM220A Asia - (PPE+PS)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin WM220A Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL WM220A resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + Polystyrene (PS). This injection moldable grades exhibits excellent long term hydrolytic stability, very low water absorption, heat / hot water resistance and is an excellent candidate for a various water management applications such as pump housings, impellers and valves. See NORYL FE1520PW resin for NSF /ANSI 61 and global potable water compliant version.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Indice de fluidité, MFI 9.4 g/10min ASTM D 1238
Température 300 °C -
Charge 5 kg -
Retrait au moulage , parallèle 0.003 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Module de flexion 5640 MPa ASTM D 790
Résistance à la flexion 150 MPa ASTM D 790
Dureté Rockwell R 124 - ASTM D 785
Izod choc avec entaille, 1/8 in 150 J/m ASTM D 256
Propriétés thermiquesValeurUnitéNorme du test
ASTM Data
DTUL à 264 psi 141 °C ASTM D 648
Propriétés électriquesValeurUnitéNorme du test
ASTM Data
Résistance de la surface 1E16 Ohm ASTM D 257
Propriétés diversesValeurUnitéNorme du test
Absorption d’eau, 24hr 0.06 % ASTM D 570
Densité 1230 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Stabilisé à la chaleur
Caractéristiques
Amorphe, Bas gauchissement
Résistance Chimique
Stabilité hydrolytique
Certifications
Contact alimentaire, NSF 51 approbation, Contact avec l'eau potable NSF 61
Applications
Construction
Disponibilité régionale
Asia Pacific
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.