Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PX1180 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin PX1180 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés électriques - Propriétés diverses - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
NORYL™ PX1180 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This impact modified, injection moldable grade was developed for automotive interior applications requiring Standard ECE Dashboard Impact Test. NORYL PX1180 resin offers high heat resistance, good impact resistance, low specific gravity, and dimensional stability. It is available only in black color.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 12 cm³/10min ISO 1133
Température 280 °C -
Charge 5 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 1800 MPa ISO 527
Contrainte d'écoulement 35 MPa ISO 527
Déformation au seuil d'écoulement 3 % ISO 527
Contrainte à la rupture 40 MPa ISO 527
Déformation à la rupture 50 % ISO 527
Module de flexion 1500 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 25 kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 10 kJ/m² ISO 179/1eA
Résistance au choc Izod (entaillé), +23°C, 4mm 25 kJ/m² ISO 180/1A
Résistance au choc Izod (entaillé), -30°C, 4mm 11 kJ/m² ISO 180/1A
Ball indentation hardness 70 MPa ISO 2039-1
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de ramolliss. Vicat, A 130 °C ISO 306
Température de ramolliss. Vicat, B 115 °C ISO 306
Température de ramolliss. Vicat, 120°C/h 50N 120 °C ISO 306
Conductivité thermique 0.22 W/(m K) DIN 52616
Propriétés électriquesValeurUnitéNorme du test
ISO Data
Permittivité relative, 1MHz 2.6 - IEC 62631-2-1
Facteur de pertes, 1MHz 9 E-4 IEC 62631-2-1
Résistivité transversale 1E13 Ohm*m IEC 62631-3-1
Résistivité superficielle >1E15 Ohm IEC 62631-3-2
Propriétés diversesValeurUnitéNorme du test
Absorption d'eau 0.14 % Sim. to ISO 62
Absorption d'humidité 0.06 % Sim. to ISO 62
Masse volumique 1060 kg/m³ ISO 1183
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 - 100 °C -
Pré-séchage - temps 2 - 3 h -
Température de la matière fondue 280 - 300 °C -
Température du moule 60 - 100 °C -
Température - Zone d'alimentation 60 - 80 °C -
Zone 1 240 - 260 °C -
Zone 2 260 - 280 °C -
Zone 3 280 - 300 °C -
Caractéristiques
Transformation
Moulage par injection
Propriétés spéciales
Modifié choc
Applications
Automobile
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.